Why a Pressure Washer is Essential To Clean Your Gutters

Why a Pressure Washer is Essential To Clean Your Gutters

The gutters on your home can be difficult to clean, especially when you don’t have the tools you need to clean them correctly. It’s hard to reach your gutters and soffits with just a ladder and hose, which is why pressure washers are used by professionals to get your gutters cleaned or by using a professional gutter cleaning service is recommended.

A pressure washer can help eliminate chemical residue, mold, grease and any other contaminants from your rain gutters.

To protect your home and surrounding foliage, there are a number of steps to take when you are going to pressure wash your gutters on your own.

Protect Your Foliage

When you are going to use soap to clean your gutters and soffits, you will want to use the low-pressure nozzle and give your gutters, soffits and surrounding foliage a good soak. This will rinse off a good amount of debris and give your soap a chance to work.

After cleaning your gutters, rinse your foliage once again to get rid of any soap residue.

fter the First Rinse

pressure washer gutter cleaning

Use detergent to get the dirt and grime off your soffits and gutters. Pay attention to the detergent you are using and dilute the detergent as directed.

Cover your soffits and gutters with detergent and let it soak for about 15 minutes. Pay attention to avoid getting water into your soffits, as this can lead to mold and mildew growth.

Remove the Dirt and Detergent

Once the detergent has broken up the dirt and loosened it, use the high-pressure nozzle and rinse your soffits and gutters thoroughly.

Make sure the detergent nozzle is off so that you don’t add more detergent to your home while trying to rinse it off. You will want to use the low-pressure rinse one more time on your home and foliage after rinsing off the detergent to get any remaining particles.

Use a Gutter Cleaning Attachment

weatherguard wash wand
You don’t have to get up on a ladder with a pressure washer to clean your gutters. You can use a gutter cleaning attachment instead, which is a much safer way to clean your gutters.

When you don’t have the equipment you need, it can be easier to have a professional come and clean your gutters instead.

If you need to have your gutters cleaned, contact us today at Weatherguard Gutters to get a free estimate. We have been serving homes in Vancouver and the Lower Mainland for more than 25 years, and we are ready to help you with all your gutter needs.

The post Why a Pressure Washer is Essential To Clean Your Gutters appeared first on Weather Guard Gutters.

Using Your Gutters for Rainwater Collection

Using Your Gutters for Rainwater Collection

When you have a good gutter system on your home, you can do more than simply move the rain away from your home. You can use your gutter system to collect rainwater and have usable water for a variety of activities around the home. When water is in high demand, you can harvest this natural resource using your gutters.

Set Up Near Where Water Is Needed

Your first step is to decide where you are going to use water, and set up a collection barrel near this area. If you want to use collected rainwater to irrigate your garden, the collection barrel should be in the downspout closest to your garden. Consider what type of barrel you want to use, and choose one that is the right size for the amount of water you want. While whiskey barrels are great, so are plastic trash containers and other types of collection devices.

Know How Much Water is Coming

When it comes to collecting rainwater, you have to be prepared for any overflow. You will want to know the square area of your roof to be able to determine how much water you can expect. For every 100 square feet of space, you can expect 60 gallons of water for every inch of rain. When your barrel begins to overflow, you will need to make sure water flows away to protect your home.

How to Use Collected Rainwater

Once you collect your rainwater, it can be used in a number of ways. The water you have collected has not been properly treated and you or your pets should not drink it. In addition, any water collected should be used within a week or two to avoid algae growth. You can use it to irrigate your lawn or garden, but be sure to wash any vegetables you have grown before you eat them. You can use the water to wash clothes, water indoor plants, and cleaning your home.

s Winter Approaches

With freezing weather coming, you aren’t going to be able to collect rainwater. Remove the barrel over the winter months, and reattach the rest of the downspout on your gutter system. Clean out your water barrel so that it is ready for the next season. Make sure that any water that flows over the next few months will be guided away from your home.

Contact Weatherguard Gutters for Gutter Maintenance Services Today!

At Weatherguard Gutters, we are ready to help you keep your gutter system working great. If you want to figure out how to collect rainwater this season but aren’t sure what to do, contact us today. We have been helping homeowners in Vancouver and the surrounding area for more than 25 years better manage the gutter system on their home and we are happy to provide you with a free estimate.

The post Using Your Gutters for Rainwater Collection appeared first on Weather Guard Gutters.

Why You Shouldn’t Underestimate Your Gutters

Why You Shouldn’t Underestimate Your Gutters


Maryland Gutter Installation

Gutters may seem like a small part of any home, but don’t underestimate the role they play. We’ve seen a lot of rain this summer and there’s only more to come, but with proper gutters, your home can stay safe. When it rains, your home’s gutters help direct rain off of the roof and away from your foundation, and if your gutters are damaged, sagging, or clogged, it could see some serious damage.

If You Didn’t Have Gutters

If your home didn’t have a gutter system, you’d find water dripping over the edges of your roof, which could weather your siding and pool up in the areas where your foundation is low. If this happens, the water will start to wear away at your foundation as well as your siding.

During larger storms, water would spill over the edges of your roof and soak the ground right next to your home. Since that area would experience water from the falling rain plus all the water from your roof, it would become a weaker surrounding area for your foundation and could cause the structure to crack.

Gutters also help protect outdoor hardscapes, like decks or patios, from wearing down under a lot of moisture and losing their aesthetic luster. Many homeowners plant landscaping features like bushes or shrubs near their homes and gutters also help protect those as well.

If Your Gutters Are Damaged or Clogged

While not having gutters is a problem, having damaged or clogged gutters is also a problem. If your gutters are rusted, they could be leaking; if they’re sagging or pulling away from your home, they could be failing to carry water away properly; and if they’re clogged with ice, leaves, sticks, or other debris, there’s nowhere for your roof water to escape.

When water sits in your gutters or overflows back onto your roof, it can soak into your home and damage your home’s structure. It can also provide a breeding ground for mold and mildew, which can not only weaken wood, but affect the health of you and your family members as well.

What to Know About Gutter Installation

When it comes to gutters, you can’t just install any size. You need to measure the length of your roof, the square footage of your roof, know the average rainfall in your area, and know your zoning laws. These factors will determine how wide your gutters need to be. You’ll also need to know how far away from your foundation the downspouts need to be.

We recommend leaving all of this to the experts at P.J. Fitzpatrick. We’ve been providing quality Pennsylvania, Delaware, New Jersey, and Maryland gutter installations for years, and want to help you protect your home. Give us a call or fill out our contact form to get started.

The post Why You Shouldn’t Underestimate Your Gutters appeared first on PJ Fitzpatrick.

Home Improvement History Lessons: Gutters

Home Improvement History Lessons: Gutters

gutter installation

Today, rain gutters are an essential part of any home: they’re designed to collect and move water away from your roofing system, siding, foundation, and more to prevent water damage. From the time they were first invented until now, gutters were just as important then as they are today. Here, our gutter installation experts explore the history of gutters:

B.C. Years & The Roman Empire

Rain gutters date back to the Indus Valley Civilization of 3,000 B.C.-1,500 B.C. Back then, they were constructed from drains that were covered in bricks made of burnt clay.

Once the Roman Empire came to power in 27 B.C.-14 A.D., they revolutionized the drainage system of roadways by building them higher in the middle so that the rain flowed down into “gutters.” They brought this system to England around 47 A.D., however, little was done to reform it.

The Norman Empire

It wasn’t until the spread of the Norman Empire between the 10th and 13th centuries that gutters systems were incorporated into architecture. Many homes, churches, and other buildings were rebuilt with stone roofing systems and parapets that gave way to gargoyles. These gargoyles would expel the excess water through their mouths, essentially making them gutters.

The 1700s

In the early 1700s, cast iron became a widely available and affordable material, so manufacturers began creating gutters out of it. (Years later, cast iron will replace lead as the most common gutter material.) Later in the century, wood was carved into V-shapes and fastened to public buildings and wealthy homes for use as gutter systems.

The 20th Century

During the Second Industrial Revolution, new technologies and materials were invented to revolutionize gutters. Once metal rolling machines were introduced in the early 1900s, builders were able to roll half-round steel gutters and place them on the edges of buildings.

By the 1960s, seamless aluminum gutter machines were invented and completely revolutionized the world of gutters. Aluminum was preferred to steel because it was strong, more lightweight, and easy to manipulate. This is the main reason many of today’s gutters are still made from aluminum.

If your home is in need of a new gutter system, contact our gutter installation experts today for more information.

The post Home Improvement History Lessons: Gutters appeared first on PJ Fitzpatrick.

Did you miss our previous article…

Power Wash For Your Home Exterior

Pressure washing with pros at https://www.martinipressurewashing.com/rain-gutter-cleaning-orange-county is probably one of the easiest and cheapest ways to improve your home’s resale value and a great way to avoid the time, cost, and trouble of future leaks. So why not protect your largest investment: your gutters! Gutters are integral to preventing water from getting into and damaging your roof. This article will help you learn how to pressure-wash your gutters to keep them looking great.

Start by removing all debris from your gutters. Take out as much debris as possible because if you don’t remove it then you are just throwing it in the garbage and possibly ruining it for many years to come. After removing all of the debris, you should rinse off all of your leaves and branches from around your home. The best way to do this is with a garden hose by using a telescoping extension wand. This will save you a lot of time and energy!

pressure washing

After rinsing off the leaves and dirt, you should empty out your gutters and start a new block of dirt. You can purchase a pressure washing attachment for your garden tools so that you can clean all of your gutters in one fell swoop. When doing this, you need to make sure that you put down a tarp under the debris so that it doesn’t get pushed into your gutter and clog it.

After cleaning your gutters and attaching your extension wand, you are ready to begin your pressure washing. Use your garden hose and start down the path where you want your driveway to be. When you reach the end, you will have a nice layer of dirt to act as a barrier against future debris.

The next step is to line your garden hose up with the edge of your driveway. Start spraying gutters down with your pressure washers. If you have any extra leaves or other debris on them, you can use a leaf blower to blow them away.

As you are spraying your dirt, be sure to check your back yard. You may have some leaves and other debris on there that can be easily removed with a garden hose without the use of a pressure washer. The easiest way is to use a pressure sprayer attachment for your garden tool belt and clear away whatever you find. Be sure not to miss any nooks or crannies that might hold dirt or debris.

If you find yourself with a rather large mess to clean up, consider purchasing some pressure washing attachments for your garden tools. These attachments can help remove large areas of dirt very quickly. Just be sure that you don’t use a jet nozzle to do this. You will be blowing all of your dirt out at once and this can lead to an explosion of water if you aren’t careful. Use a longer hosing cord for these jobs and make sure you clear away all of your gutters before you start with the cleaning.

Before you start washing your home exterior, be sure to wear eye protection. You will need to do this no matter what type of pressure washing equipment you are using. You should always wear eye protection when performing any type of hard physical work. The last thing you want is to get hit in the eyes by one of these implements. You can save yourself some pain later if you take the time to protect your eyes before you start.

When performing your house washing service, you will need to purchase a pressure washer attachment for your garden tool set. These attach to the garden hose and spray water from your pressure washer gun at high pressure into the gutters. Be sure that you have plenty of hoses to carry the water back and forth from your pressure washer gun so that you can clean the sides and roof of your home as well. Be aware that these guns leave residue behind on the sides of your home and these can cause unwanted problems later. If you have any problems cleaning on the roof, your green grass may be slippery and you may end up slipping.

It is recommended that you only clean soffits that are completely open. If you do not open all of the soffits, you will have more difficulty reaching them and spraying the water from your pressure washer. This will prevent soffits from stiffening up during your washing. It also prevents soffits from being damaged by excess water which could cause unsightly water stains and mold.

Power washing your home exterior can provide you with a tremendous amount of savings on your electric bill, reduce your energy consumption, and beautify your outside landscape. If you are planning on doing a power wash on your home exterior yourself, it is highly recommended that you hire a professional. There are many contractors out there that will do a great job and charge a fair price. Do not attempt to power clean your home. It does take time and practice to master the process. Plus, your power wash leaves a sooty residue behind that could attract termites, attract wildlife over time and attract potential thieves who would see an opportunity in a dead bird or mouse within your home.

Don’t Let Sagging Gutters Ruin Your Curb Appeal

Don’t Let Sagging Gutters Ruin Your Curb Appeal

While things like damaged siding and missing roof shingles can plummet your home’s curb appeal, a sagging gutter system can do the same. If you’ve ever seen sagging gutters on a home, you know how sloppy and unappealing they can be, which is why our gutter experts recommend replacing or repairing them when they get to that point.

Sagging Is Inevitable

No matter how great your gutter system is, the truth is it will begin to sag. Eventually, gravity will take hold of the mounts that are installed on your home to keep your gutters in place and it will pull on them a little every day. Over time, they’ll begin to shift and if you have leaves and other debris built up in them, they’ll shift even more once water starts to collect.

Sagging gutters are not only unappealing, but they’re also not as effective as they should be. Every home needs a working gutter system to transport water away from the structure. If your gutters aren’t doing their job, you risk dealing with leaks, clogs, and even water damage to your home.

What to Do

While it’s entirely possible to correct your gutter system yourself, it can be dangerous. You’ll not only need new mounting brackets (and possibly new gutters if yours are in bad shape), but you’ll also need a ladder, balance, and careful hands. If all of that doesn’t sound like something you want to try to tackle, you could always call the gutter experts at P.J. Fitzpatrick. Our specialists can repair your existing gutter system so that it works perfectly. We can reinstall any type of hangers that are currently mounted to your system including spike and ferrule hangers or clip hangers. We can also realign your system so that it sits level and drains properly.

If your gutter system is old and beyond repair, talk to us about a new system. Our patented Gutter Protection System will permanently eliminate your need to clean your gutters. It will also protect your interior, exterior, basement, and foundation from water overflow and it comes with a lifetime transferable warranty.

Don’t risk ruining your home’s curb appeal – call us today to get your sagging gutters back into shape.

The post Don’t Let Sagging Gutters Ruin Your Curb Appeal appeared first on PJ Fitzpatrick.

Gutter Protection Tips

Gutter Protection Tips

Rain gutters are channels, typically made of concrete, that channel rainwater away from your house and direct it away to a designated landscape area or yard. Reducing water loss in the roof prevents mold build-up and water-borne diseases from reaching your family. Reducing water loss also minimizes the risk of structural damage, such as leaks, that can lead to costly repairs. Reducing the risk of leaks or damaged gutters also makes gutters more attractive and pleasing to the eye.



When it comes to gutter replacement, copper is an excellent choice for your home. Copper has a naturally reflective surface that will not reflect sunlight and reduce heat buildup. Aluminum gutters are very inexpensive, but they are prone to rust and corrosion. If you want to save even more money, consider purchasing galvanized copper gutters. Galvanized steel or aluminum gutters are similar to aluminum gutter replacement, but they do not rust.


The importance of rain gutter repair should never be underestimated. A gutter system will go through many years without needing to be replaced, so it is well worth spending a little extra money to get it repaired in the event of a problem. However, knowing the signs that your gutter needs to be replaced and making sure to spot them before the problem becomes worse is the best way to prevent costly gutter replacement later on. Here are a few common gutter problems that you can expect if you live in an area with a heavy amount of rainfall or winter rainfall:


Mildew: Mildew is often one of the most common gutter problems experienced by homeowners. Because it forms on the surface of the roof, it is easy to miss the small holes or tears that allow water to enter the gutters. It’s important to identify small or large areas of damage so that you can contact a professional company to repair the issue before it gets worse. Mildew can cause serious damage to the walls of a home, which could require extensive repairs.


Graffiti: While graffiti might look like just a small piece of trash, it represents a very unhealthy situation that can actually spread to other parts of a home’s exterior. Roof leaks, sagging gutters, and debris buildup are all signs that your roof needs to be repaired. While simple repairs such as patching can fix the immediate problem, larger infestations of graffiti can cause irreparable damage to your roof, walls, and foundation.


Mold: Mould is another very common problem experienced by homeowners. In fact, mold can spread quickly throughout a property if it is not detected and removed immediately. Mold can cause allergies and respiratory problems, so it’s important to have it repaired as soon as possible. One way to check for signs of mold is to check for discoloration in your gutters. If you see brown spots, mold growth, or discoloration on your gutters, you should contact a local business for gutter repairs. There are some industrial mold removers available that can help to quickly eliminate any problems that you might not have even realized were a problem.


Leaking Roof: If your gutters are not functioning properly or have become clogged with debris, they may need to be replaced. If your gutters are clogged, this will prevent them from working properly, which can lead to water damage. In addition to causing water damage, mold can also create breathing difficulties for you or your family. You may need to purchase a mold assessment kit to determine what the problem is. If you do need to purchase a mold assessment kit, you may want to invest in two or three different ones, so that you can check your roofs for signs of damage from mold as soon as possible. You don’t want to wait until it is too late before you realize there is a problem with your roof.


Gutter guards are an affordable, effective way to reduce the risk of leaking and water damage. When purchasing a new gutter guard, be sure to ask the seller to show you a picture of it at different angles so that you can be sure the seamless fit will work correctly. Although seamless vinyl gutter guards cost more than other options, they will save you money on roof repair, because they will stop leaks from occurring before they start. Because of their low cost and high effectiveness, seamless gutter guards are a great investment for anyone who has a lot of exposure to the elements and wants to protect their home from damage caused by water and insects.